A Quick Overlook of Tips – Your Cheatsheet

A Guide to Wood Science

The study of wood as a renewable material and organic material is what is known as wood science. In other words, the term wood science can also be known as wood technology. To be able to study wood it has to be compared to other products. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. Wood has many advantages and this technology takes the advantages and utilizes them. Some of these advantages include wood being a versatile material that can be used in a wide range of products. Wood is renewable, and this makes it more precious. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.

The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. The biggest threat to wood being moisture and insects has to be kept away from the wood. The moisture courses the timber to decay and the insects eat through the wood. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. This is a copper-based preservative that is applied to the wood for protection. Although being a good method to use for wood protection it has presents some few challenges. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The saturation level of any treatment will depend on where the wood is going to be used and the species of the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.

Another wood treating method that is fast being accepted is the use of copper metal. This method is being accepted fast because is friendly to wooden fasteners. Micronized copper wood preservative is the correct term to refer this type of preservation. A high-pressure liquid that has the copper metal mixed in it is driven into the wood. The difference between this method and the other copper-based methods is that the copper is used as a metal rather than a dissolved material. This process is highly effective and the wood properties and heightened. The time the wood products treated using this method last is longer other types of treatment.

Termites and fungal decay are just a few among the many problems wood treated from this method are protected against. It is not corrosive to metals used in together with the product. Extensive research over a period of 10 years has proven the effectiveness of this science as one of the best wood preservation methods.